The recently passed federal legislation, widely known as the “Big Beautiful Bill,” is bringing significant changes to the renewable energy landscape. At Wescom, we’re closely tracking how these updates will affect our customers, from residential solar homeowners to large commercial clients and oil and gas operations.
For Residential Solar Clients: The Clock Is Ticking
The 30% federal solar tax credit for residential systems will officially end on December 31, 2025. To qualify, homeowners must have their systems fully installed and commissioned by that date. Unlike past programs, there will be no gradual phase-out. After the deadline, new residential solar systems will no longer be eligible for any federal tax credit.
We are taking this seriously and actively adjusting crew schedules and shifting resources to help as many clients as possible meet the cutoff. If you’re planning to go solar, don’t wait. We’re committed to getting your project completed on time and keeping you informed every step of the way.
For Commercial Clients: Stricter Rules Coming Soon
Commercial and utility-scale solar projects are still eligible for the 30% federal tax credit through 2025, but that window is closing fast. After 2025, projects will face stricter compliance requirements, including wage, apprenticeship, and domestic content standards, in order to qualify for the full credit. Without meeting those criteria, the credit could be significantly reduced.
If you’re planning a commercial solar installation, now is the time to plan carefully, secure your place in the schedule, and move forward while the full incentive is still accessible with fewer restrictions.
Oil and Gas: A Shifting Landscape
The Big Beautiful Bill also reflects a broader shift in U.S. energy priorities. While fossil fuel incentives remain in place, federal support for renewables and clean technologies is growing. This evolving landscape won’t change overnight, but it underscores the importance of long-term flexibility and strategic planning across the energy sector.
Wescom remains firmly rooted in oil and gas, and we continue to serve our clients with pride across production, pipeline, and compliance work. At the same time, we’re expanding into industrial infrastructure and emissions-reduction projects to position our team to thrive no matter how the energy sector evolves.
Safely Energizing America Today and Into the Future
At Wescom, we’re not just tracking policy. We’re acting on it. We are safely energizing America through high-quality work, agile workforce strategies, and a deep commitment to helping our clients navigate what’s next. From solar to oil & gas, maintaining production assets, or planning future infrastructure, we’re with you every step of the way.
Safety Moment
Arial Lift Safety Basics
Aerial lifts (including boom lifts, scissor lifts, and vertical towers) are essential on job sites but also carry serious risks. OSHA and industry best practices outline key steps to use them safely.
Before You Use an Aerial Lift
Inspect the Equipment:
- Check fluid levels, tires, brakes, lights, and emergency controls.
- Make sure guardrails are intact and locking pins, cables, and fasteners are secure.
- Remove defective equipment from service until fixed.
Inspect the Work Zone:
- Look for overhead power lines, uneven surfaces, holes, slopes, or bad weather.
- Set up cones, signs, and barriers to protect the work area.
Using the Lift Safely
Fall Protection
- Use a full body harness with a lanyard if required.
- Never stand on rails or use ladders on a lift.
Stay Within Limits
- Do not overload the platform. Include the weight of workers, tools, and materials.
- Do not exceed the lift’s reach limits or operate in high winds.
Stay Clear of Hazards
- Keep 10 feet away from power lines.
- Watch for ceilings, structures, or moving vehicles.
No Shortcuts
- Never override safety devices.
- Do not drive with the lift raised unless allowed by the manufacturer.
Training is Required
All aerial lift operators must be trained in:
- Recognizing hazards such as falls, tip-overs, and electric shock
- Safe operation, inspection, and emergency procedures
- Following manufacturer’s instructions and OSHA rules
Retraining is required if:
- An accident occurs
- A new lift type is used
- Unsafe operation is observed
More Posts